ESD PETG / Add: North - Black

ESD PETG / Add: North – Black

140.00 лв. (71.58 €)

ESD PETG – Add: North

Material based on PETG Protects against electronic discharges Suitable for electronic housings UV resistance
Categorys: ,

Description

 

Brand (manufacturer): Add: North
Weight: 750 g
Diameter: 1.75 mm
Product type: ESD PETG
Colour: Black
Density: 1.3
Operating temperature: 75°С
Net weight: 750 g
Print Temperature: 255-270°С
Heating plate temperature: 80 – 85 °C

 

DESCRIPTION

ESD-PETG is a PETG-based conductive filament that protects against electrostatic discharges. This is very useful when printing parts that come into contact with sensitive electronics that can be damaged by static electricity.

ESD-PETG comes with almost the same material properties as regular PETG. It has high abrasion and chemical resistance, high UV resistance and medium hygroscopic properties, which means it is moderately sensitive to moisture and needs drying if exposed to normal room humidity for extended periods of time.

Typical applications include: hard drive components, housings, connectors, fixtures, wafer handling and transport.

The target resistance is 10^6-10^9Ohm-cm.

  • Recommended slice settings in Cura, Simplify 3D and PrusaSlicer.

ESD PETG , with all Add North fillets, are manufactured in Sweden and have a diameter tolerance of ±0.025 mm.

ESD PETG is available on 750 g spools with a diameter of 1.75 mm and 2.85 mm.

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.