BRONZEFILL

98.00 лв. (50.11 €)

BRONZEFILL

3D print with metal now at home!
With this one-of-a-kind material, you can print real bronze images that look laser sintered with a matte finish;
1.75mm – weighing 0.50KG

Description

BRONZEFILL

Recommended printing temperature:195-220C*
Recommended print speed: 40 – 100 mm/s
Temperature of heated print pad (if available):50-60C
Tip:
With a little sanding and polishing, your Bronzefill printed objects will shine;
Begin sanding with 120-180 grit sandpaper and make sure all printed lines are well polished;
Be careful not to scrape off too much of the material and continue with sandpaper size 240-320 and finish with size 600;
For a finishing touch, wipe with a soft cloth and a small furniture wax for shine;
The weight of the material is something special, about 3 times heavier than standard PLA.
Now you can print jewelry that won’t look like cheap lightweight plastic parts.
With a little sanding and polishing, your Bronzefill printed objects will shine; the weight of the material is something special, about 3 times heavier than standard PLA.
Now you can print jewelry that won’t look like cheap lightweight plastic parts.